Page | 2
Page | 3
SETUP
1. Check that your gateway has a solid
red light showing.
2. Insert Water Detector into sensor.
3. Insert 2 AAA batteries into sensor.
Observe correct polarity.
4. Download La Crosse Alerts Mobile App.
5. Follow the on screen instructions.
AA
A
AA
A
GATEWAY LIGHTS
4 BLINKS: Ready to register
3 BLINKS: Cannot find server
2 BLINKS: No IP address
1 BLINK: Check LAN cable
NO LIGHT: Check power cord
RED/GREEN LIGHTS BLINK:
Delete existing registration
SOLID RED: Registered
FACTORY RESET
Gateway:
1. Remove power cord
2. Hold gray button & insert power cord
3. Continue to hold until red light flashes twice. Release button.
4. When light flashes 4 times, register.
Sensor:
1. Hold gray button on sensor until sensor display resets.
• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable
for intended use;
• Clean the battery contacts and also those of the device prior to
battery installation;
• Ensure the batteries have with correct polarity (+ / -)
• Remove batteries from equipment that will not to be used for an
extended period.
• Promptly remove expired batteries.
CARE AND MAINTENANCE
• Temperature: -40ºF to 140ºF (-40ºC to 50ºC)
• Humidity: 3% RH to 99% RH
• Wet/Dry: H2O/Dry
• Transmission: 200 ft. (60.96m) in open air
• Battery Requirements: Sensor: 2 “AAA” (LR3) battery (not included)
• Dimensions: 1.44” L x 0.76” W x 5.73” H (3.66 L x 1.93 W x 14.55 H cm)
System Requirements:
• iOS 8 or greater is required with a Safari browser
• Android 4.0.3 or greater is required with Chrome or Stock browser
Browser:
• Mac supported versions (min) OSX 10.8, 10.9 or 10.10 with Safari 6.1.1+,
Chrome 36+ or Firefox 39+
• Windows supported versions (min) 7/SP1, 8.1/Update 1, or 10 (Pro/Home)
with Chrome 36+, Firefox 39+ or Internet Explorer 10/11.
SPECIFICATIONS
WARNING: This product can expose you to chemicals including
styrene, which is known in the State of California to cause cancer.
For more information go to:
Setup Video:
