3
BASICS
Power Up
Note: After all parts have been powered on, the
station will begin searching for your outdoor sensors.
These should automatically connect within the next 10
minutes.
3.
Install the power cord into an
outlet, and then into the back of
the weather station. For backup,
install 3 “AA” batteries into the
Battery Compartment.
Note:
Power cord is required
for constant backlight. Display
will come on for 10 seconds at a
time after a button push if only
powered via batteries.
Bottom of Breeze Sensor
Model No.
TX145WSDTHv3
Back of Station
Model No.
328-1414
Initial Setup
1.
Remove the top
Funnel and install
2 “AA” batteries
into your Rain
Sensor’s Battery
Compartment.
Inside of Rain Sensor
Model No.
TX145R
Install 3 “AA” batteries
into your Breeze
Sensor’s Battery
Compartment.
2.
