background image

Page | 9

327-1417BW

Wind Speed Weather Station

Programmable Alerts

Here is the setting order for the 9 programmable alerts.

• High Wind Speed ON/OFF (CURRENT wind) 

• High Wind Speed Value 0-99mph (0-159kph) 

• Outdoor LOW Temperature ON/OFF 

• Outdoor LOW Temperature Value -40°F to 140°F (-40°C to 60°C) 

• Outdoor HIGH Temperature ON/OFF 

• Outdoor HIGH Temperature Value -40°F to 140°F (-40°C to 60°C) 

• Outdoor LOW Humidity ON/OFF 

• Outdoor LOW Humidity Value 10%RH to 99%RH 

• Outdoor HIGH Humidity ON/OFF 

• Outdoor HIGH Humidity Value 10%RH to 99%RH 

• Indoor LOW Temperature ON/OFF 

• Indoor LOW Temperature Value 32°F to 99°F (0°C to 37°C) 

• Indoor HIGH Temperature ON/OFF 

• Indoor HIGH Temperature Value 32°F-99°F (0°C to 37°C) 

• Indoor LOW Humidity ON/OFF 

• Indoor LOW Humidity Value 10%RH to 99%RH 

• Indoor HIGH Humidity ON/OFF 

• Indoor HIGH Humidity Value 10%RH to 99%RH

Active Alert

• When armed alert value is reached, station will beep 5 times each minute, until 

   out of alert range.

 The flashing alert icon will indicate which alert is sounding.

• Press any button to stop the alert sound. 

 The alert icon will flash while value is in alert range.

Disarm Alert:

1. Hold the ALERTS button for 3 seconds to enter alert set mode. 

2. Press and release ALERTS button until you see the alert you wish to disarm.

3. Press the +/- buttons to disarm the alert.

4. Press the WARNING button to exit.

Temperature | Humidity Trend Arrows

• The temperature and humidity trend arrows update every 15 minutes. The trend 

   reflects changes (2°F and 3% humidity) over the past 1 hour. E.g.: At 1:00 - compare 

   to 12:00 data; at 1:15 compare to 12:15: at 1:30 - compare to 12:30 ….. etc

Up Arrow:

 

Rising

Down Arrow:

 

Falling

Right Arrow:

 

Steady

Summary of Contents for 327-1417BW



















Reviews: