Page | 12
327-1417BW
Wind Speed Weather Station
Change Batteries
TX141Wv2 Sensor:
1. Grab the vented portion of the sensor and turn counter clockwise.
2. Remove old batteries and install fresh “C” batteries.
3. Carefully align and turn vented portion clockwise to tighten.
4. Hold the WIND button on the weather station for 3 seconds to search for the sensor.
TX141Wv2 Sensor
Optional Add-on
TX141TH-BCH Sensor
Add-on TX141TH-BCH Sensor(s):
1. Slide battery cover down and lift off sensor.
2. Remove old batteries and install fresh “AA” batteries.
3. Hold the TEMP button on the weather station for 3 seconds to search for the sensor.
• Hold the WIND button for 3 seconds to search for the wind sensor.
• Hold the TEMP button for 3 seconds to search for add-on temp/humidity sensors.
• If the signal is lost, the unit will display the last data recorded for 30 minutes. If the
signal is still not received after this time, dashes will be displayed on screen.
• After 60 minutes, the station will begin to search for the missing signal automatically.
• The signal strength indicators will flash while searching and be solid when connected.
Sensor Search
Channel
Selector
TX button
(Transmission)
Red LED
Flashes during
transmission
AA
1 2 3
AA
AA
AA
Mounting Hole
Wind cups
C
C
Red LED
Flashes during
transmission
Battery cover
Mounting pole
Mounting
Bracket
