Page | 14
327-1417BW
Wind Speed Weather Station
Wind cups
C
C
Red LED
Flashes during
transmission
Mount TX141Wv2 Sensor
Battery cover
Mounting pole
Mounting
Bracket
Side Mount
Option
• For the most accurate wind speed readings,
mount the TX141Wv2 sensor as the highest
object for 50 feet in all directions.
• Mount sensor vertically with the wind cups on top.
• The maximum wireless transmission range to the
wind station is over 330 feet (100 meters) in
open air, not including walls or trees.
1. Insert mounting pole into sensor.
2. Tighten screws
3. Insert bottom of pole into mounting bracket
4. Tighten knob to secure
5. Use screws through the bottom of the mounting
bracket to attach.
6. The sensor can be mounted from the bottom or
side.
Alternatively:
1. Insert your own mounting pole into the sensor.
2. Tighten screws
3. Mounting bracket would not be used.
Mount Add-on TX141TH-BCH Sensor
AA
AA
• To mount the sensor, use the hole at the top to
either hang it from the back using a nail, or
inserts one mounting screw through the front
• Mount the TX141TH-BCH sensor on a
north-facing wall or in any shaded area. Under an
eave or deck rail is preferred.
• The maximum wireless transmission range to
the weather station is over 330 feet
(100 meters) in open air, not including walls
or floors.
• Be sure the sensor is mounted vertically, to
allow moisture to drain out properly.
•
http://bit.ly/TH_SensorMounting
Mounting Hole
