background image

Model: 308-1425B  www.lacrossetechnology.com/support  

Page | 2

  

Get Started 

 

Step 1: 

Insert the 5 volt AC cord (included) into the wall outlet then into  

             the forecast station.  

Step 2: 

Insert the 3 

new

 AAA Alkaline batteries (included) into the   

             forecast station. Observe the correct polarity.

 

Step 3: 

Insert the 2 

new

 AA batteries (not included) into the  

             TX141TH-Bv2 outdoor sensor. Observe the correct polarity. The  
             red LED will flash during transmission. 

Restart:

 If there is no outdoor temperature data after 3 minutes, unplug the AC 

adapter and remove batteries from the forecast station & outdoor sensor for 15 
minutes. Return to 

Step 1

 above. 

 

Set Time, Date, Temperature Unit 

 
1. 

Hold the 

TIME SET

 button to enter time set mode.  

2. 

Press the ▼ or ▲ buttons to adjust the values. 

3. 

Press the 

TIME SET

 button to confirm adjustments and move to the 

next item. 

 

Time setting order:        

  

1. 

WWVB time signal (On/Off)   

 

2. 

Time Zone - 7 time zones   

 

 

3. 

DST (Daylight Saving Time On/Off)   

4. 

12/24 hour time format 

 

 

 

5. 

Hour 

 

 

 

 

 

6. 

Minutes 

 

 

 

 

7. 

Year 

 

 

 

8. 

Month 

9. 

Date 

10. 

Fahrenheit/Celsius 

 

Press the 

TIME SET

 button to exit, or wait 20 seconds without pressing 

buttons to return to the normal time display. 

 

Set Indoor and Outdoor Temperature Alerts 

 

1. 

Hold the 

ALERTS

 button until the station beeps.  

2. 

The temperature alert value will blink in set mode.  

3. 

Press the ▼ or ▲ buttons to adjust the values. 

4. 

Press the 

ALERTS

 button to confirm & move to the next 

alert. 

 

The temperature alert order:

  

1.

 Outdoor High, 

2.

 Outdoor  Low, 

3.

 Indoor High, 

4.

 Indoor Low  

Press the 

ALERTS

 button to exit, or wait 20 seconds without pressing 

buttons to return to normal time display. 

Summary of Contents for 308-1425B









Reviews: