background image

La Crosse Technology, Ltd.            www.lacrossetechnology.com/support 

Page 5 

 

Remote Humidity goes to dashes when temperature is cold. 

 

 

The remote temperature/humidity sensor designed to work with this weather station 
may drop the remote humidity and dew point reading in cold temperatures.  

 

The humidity and dew point will return when the temperature rises. This is how the 
sensor came from the factory. The temperature itself will continue to read. 
 

Remote sensor fell. The sensor no longer works 

 

Explanation:

 If there is no physical damage to the remote sensor, the fall may not have 

caused internal damage. A fall can shock the remote sensor or the batteries in the remote 
sensor. Batteries that have fallen on a hard surface may be damaged and unable to function 
properly. 
 

 

Complete a 

Restart

 with fresh batteries. 

 

Use 

Batteries 

dated at least six years in advance of the current year. Batteries dated 

earlier than six years from now may still work, but may be unstable in performance. 

 

Note: 

A remote sensor that has fallen into puddle, snow, or other standing water, will likely 

have water damage and need replacement. Remote sensors are water resistant, not 
waterproof. 
 

Replacement Remote sensors 

 

 

Visit your local Retailer or La Crosse Technology® Store 

http://store.lacrossetechnology.com/

  

Note

: Be sure to order the correct model and frequency to avoid receiving the incorrect 

item.  

 

Call La Crosse Technology® Store at 

608-785-7939 

or e-mail from the store website if 

you are unsure about the correct item to order. Each item carries the original new 
product warranty and includes access to La Crosse Technology® technical support. 

Temperature/Humidity Trend Arrows 

 

Explanation:

 The indoor and remote temperature (2°F / 1°C) and humidity (3% RH) trend 

indicators update every 30 minutes or less. These trends represent temperature changes 
over the past three hours. 

Example:

 At 11:00, the trend arrows will reflect changes in temperature or humidity since 

8:00.  At 11:30, the trend arrows will reflect changes in temperature or humidity since 
8:30, etc.   
 

Up Arrow:  

 

Temperature has 

risen

 in the past 3 hours.  

 

Humidity has 

risen

 in the past 3 hours. 

Right Arrow:  

 

Temperature has 

not changed

 in the past 3 hours.  

 

Humidity has 

not changed

 in the past 3 hours.  

Down Arrow: 

 

Temperature has 

fallen

 in the past 3 hours.  

 

Humidity has 

fallen

 in the past 3 hours. 

 

MIN/MAX Temperature readings 

 

Explanation:

 The weather station shows the daily minimum and maximum temperatures 

each day starting at midnight (12:00 AM). The weather station automatically resets the 
MIN/MAX temperatures at midnight (12:00 AM). 

  

Summary of Contents for 308-1414M













Reviews: