Starting with the cooktop elements
30
Notice d’installation ligne “Cornuchef” Centenaire - GB
08NOTINSTGSC100/GB-4
The gas burners on our “Cornuchef” range appliances are fitted with safety thermocouples:
if a burner shuts off for any reason, the gas supply for that burner is automatically stopped.
The thermocouple should not be activated for more than 15 seconds; if, after this time, the
burner has not ignited, you should stop trying to ignite, and wait at least one minute befo-
re trying to reignite the burner.
1.1. Gas hobs with electric ignition (small and large burner)
All of our appliances are originally equipped with automatic gas
burner ignition.
To ignite a gas burner, press the control knob and turn it to the left
to the “high flame” position.
The burner is automatically ignited. Keep the knob pressed for 5 –
10 seconds (the safety thermocouple may take longer to react the
first time without however exceeding 15 seconds).
The sparking noise means that the ignition system is operating
normally.
· Low setting:
this is achieved by rotating the knob fully to the left or to the bottom.
· Shutoff:
bring the knob back to its vertical position by rotating it to the right.
In case the burner flame is accidentally turned off, close the burner control knob and do
not turn on the burner for at least one minute.
In case the burner flame is accidentally turned off, close the burner
control knob and do not turn on the burner for at least one minute.
1.2. Gas Hotplate
Ignition identical to that for gas burners.
INITIAL IGNITION
Defuse any trapped air from the gas network, starting with each of the burners on
the cooktop. Once this is done, the gas oven can then be ignited. However, if the
safety device for the oven is activated (red indicator ON), press the reset button
above the red indicator to repeat the procedure
.
1. S
TARTING WITH THE COOKTOP ELEMENTS
IGNITION – ADJUSTMENTS
I
GNITION
– A
DJUSTMENTS
