33
IGNITION – ADJUSTMENTS
Induction plates
To turn on the large cooking surface, simply turn the heat selector clockwise to positions
1-6. To turn off the cooking surface, turn the dial to position 0. The indicator light will turn
off.
To use the “booster” function
, it is necessary to first find the maximum position. An
additional clockwise turn will start this function. The heat selector will then return itself
to the maximum heating position without stopping the “booster” mode.
There are 4 ways to stop the “booster” function:
- Turn it the same way as you did to start the function.
- Reduce the heating power by turning the selector anti-clockwise.
- Remove and put the cookware back (pan, saucepan, etc).
- Wait for the function to stop automatically. For safety reasons, the system automatically
switches off the “booster” function after 10 minutes.
The indicator light
gives 4 types of notification:
1. Normal operation: steady light
2. No cookware: slow blinking
3. “Booster” mode: blinking with a long lit period followed by a short unlit period
4. Induction generator fault: very fast blinking
When the temperature in the heating area is greater than 60°C, an “H” symbol appears on
the surface when the cooker is off; this symbol disappears when the temperature in the
heating area drops below 60°C.
1.4.3. Grand WOK induction (Grand-Papa 135 and 180)
The Wok induction cooker is made of ceramic glass, a material that
cannot be deformed when heated and is easy to clean with the
simple wipe of a sponge.
The principle of induction cooking is based on the creation of a
magnetic field between the recipients and the inductors. The
ceramic glass surface is electrically and magnetically passive and
heated only by the heat given off by the cookware.
An identical phenomenon happens for the induction Wok where
the inductors match up with the curved shape of the Wok cooking
surface. Only the Wok and the ingredients are heated, the Wok support itself remains at
room temperature. The cooking surface remains cool around the recipient, allowing it to
be cleaned easily because spillage will not burn on.
The magnetic field reacts immediately to the change in selected temperature and allows
the cooking surfaces to adjust quickly.
The large cooking surface of our Grand WOK induction with
a cooking surface of 300
mm in diameter
is specially suited for cooking in pans with round bottoms.
Your cooker has a nominal heating power of 2300 Watts, and with the ultra-powered
“booster” function, it can reach 3000 Watts.
The ultra-powered function provides additional power to the cooker.
Notice d’installation ligne “Cornuchef” Centenaire - GB
08NOTINSTGSC100/GB-4
