en
15
ASSEMBLY INSTRUCTIONS
Please note:
If the hood is ordered without a ferrule, before fixing the mantel in place, you must remove the
lugs (
L
) that are designed for fixing the ferrule in place and pull down the guiding lugs (
M
).
9.
Position the hood ferrule (
F
) in place by sliding it in parallel above The Hood mantel. The two clips on the
rear lugs (
L
) must be inserted into the holes (
H
) on the ferrule. The screws (
G
) on the left and right of the
hood must simultaneously enter the holes provided for that purpose in the ferrule. By pushing the ferrule
backwards strongly, these screws ensure that the ferrule is well positioned and sufficiently stable
*
.
*
Do not pay attention to Paragraph 9 if the hood is ordered without a ferrule.
Summary of Contents for Chateau series
