INSTALLATION GUIDE FOR
“C
HÂTEAU
” RANGE
- G4
08NOTINSTALG4/EN - 3
81
Figure 11: Gas burner and cast iron solid top
3
REPLACING THE OVEN LIGHT
The light is located on the side at the top of the oven; it is automatically switched on when the oven door
is opened.
Please note: disconnect your oven before interfering with the light to prevent any risk of an
electrical shock and to allow the appliance to cool down (if necessary).
Remove the protection glass and then unscrew the damaged light.
Refit a new light and the protection glass.
Technical characteristics of the light:
- 25 W
- 230 V
- 300 °C
- E14 base
4
CHANGING THE INJECTORS
All the adjustments and replacement of injectors or bypass screws must be carried out by a
qualified professional. It is easier to gain access to the oven injector through the back of the cooker.
The part numbers of the injectors for the various burners and the gas oven (see their locations on the
photographs below) differ depending on the type of gas used and the country of installation.
4.1
HOB BURNERS
The replacement of the burner and cast iron solid top injectors has to be done as follow:
1.
Remove the pan support or the solid top.
2.
Remove the burner cap.
3.
Unscrew the injector with 7mm standard wrench. Place the new injector and screw it.
4.
Put the burner cap back making sure it is correctly placed on the burner unit.
5.
Replace the pan support or the solid top.
Burner cap
Injector
