-
+
-
+
-
+
English
3 EN
The technical staff can activate or deactivate the resistance (if the
boiler resistance is disabled, automatic level control is inhibited).
Operate as follows:
1) Access the technical programming panels;
2) Press and hold the
OK
key for several seconds to activate/
deactivate the resistance.
3. Electric heating
Press one of the coffee dispensing keys (the relative led will remain on,
not flashing). The following message will appear on the display:
The coffee selection settings that can be changed are:
-
type
(key customisation, e.g. 3 espressos for 1 “short, normal, long”,
3 espressos for 2 “short, normal, long”, stop, disabled).
-
water dose
(volumetric dosing device impulses, 0 ÷ 1999 in steps of
1).
- Select grinder
(grinding-machine customisation)
-
MM1-MM2 -
Possibility of connecting from
1 to 2 grinders with the
optional Bluetooth function.
4. Key menu - Coffee selection
Changing menus and sub-menus:
position the cursor on the desired
line using the and keys and then press
Change the selection or value, again using the and keys
Note
: when editing data, the cursor becomes “
”, or a slider bar appears
with the minimum and maximum values that can be set:
Exiting the programming panels:
there
are two options:
1) Confirm the changes by pressing
OK
2) Exit the menu, leaving the data unchanged, by pressing
To enter programming, press the
key and then
OK
for 3 seconds.
The following message will appear on the display:
2. Technical Programming Access
Display available menus:
using the
and
keys, then press
.
ACCESSING the menus:
position the cursor on the desired line using
the and
keys, then press
(press a selection key in the case of
the “KEY SELECTION” menu)
23 April 2014
wednesday 15:15:04
KEY MENU
Type
1 coffee
Water dose
0100
Select grinder MM1
KEY MENU
Type
1 coffee
Water dose
0100
Select grinder MM1
TECHNICAL PROG.
KEY MENU
Self. learning
CONFIGURATION
TESTING
Summary of Contents for M39 Dosatron TE
Page 2: ......