0000 1999
-
+
English
30 EN
N.B. ONLY if the item “Customer Progr.” is set on
“YES" and the item “Program. block” is set on
“NO".
To access programming press the
key
the following
message will appear on the display:
Use the
and
keys to position the cursor (black line)
on the desired line, then press the
key.
Always use the
and
keys to change the setting
at
this point there are two possibilities:
1) con
¿
rm the changes made by pressing the
key
2) exit the menu and leave the settings unchanged by
pressing the
key.
Note: When modifying data, the cursor changes to "
Æ
", or a slide bar with maximum and minimum
settings will appear:
21. How to access the programming mode
Water dose 0090
Use the
and
keys to adjust the clock.
The time increases (or decreases) one minute each time
the key is pressed.
If one of the keys (
or
) is pressed and held down for
more than 10 seconds, the minutes setting stops and the
hours setting increases (or decreases).
During the time setting phase, the seconds remain at "00".
20. Clock adjustment
20
S
eptember 2017
wednesday
15:18:12
À
CUSTOMER PROG.
KEY MENU
WASHING
DATA
MENU
CUSTOMER
