14221-1800-2050, Rev. G
39
5.9 MENU
Press the Menu/Select button while on the idle display to access the menu. Press the left or right
navigation buttons to scroll through the top-level menus and press the up or down navigation
buttons to scroll through the sub-menus. Refer to Figure 5-1 for button location. While in a menu,
press the Menu/Select button to choose, activate, or toggle the selected item; similar to an enter
key. Table 5-5 provides a high-level overview of the menu layout. Menu options on your radio
may vary depending on available features and radio programming.
Table 5-5: Menu Navigation
MENUS
DESCRIPTION
CALL MENU:
ACTIVE EMERG DISPLAY
Allows the radio user to see the units currently in emergency (up to 20) on the radio
display.
EXIT EMERGENCY MODE
Exits emergency. See Section 5.33 for more information.
TALKAROUND MODE
Enable/disable talkaround. See Section 5.23 for more information.
INDIVIDUAL CALL
Allows you to select an individual for an individual call. See Section 5.15 for more
information.
CHANGE TLKGRP
Change the selected talkgroup. See Section 5.14.
PHONE CALL
Allows the user to initiate a telephone interconnect call. See Section 5.26 for more
information.
CALL ALERT
Select a group for Call Alert transmission. See Section 5.25.
CHANNEL GUARD
Select the Transmit and/or Receive Channel Guard tone. See Section 5.22.
AUDIO PLAYBACK
Replays the last recorded call. See Section 5.28 for more information.
TONE ENCODE
Analog conventional only - Transmits a programmed tone sequence on the current radio
system and channel. See Section 6.19 for more information.
T99 TOGGLE
Enable/disable T99. See Section 5.24 for more information.
EMERGENCY TIMER
Enable/disable the Emergency Check In Timer. See Section 6.22 for more information.
SCAN MENU:
START SCAN/STOP SCAN
Start or stop scan operation. See Sections 5.29 and 5.30.
SCAN LISTS
View/Edit available scan lists. See Section 6.14.
ASSIGNED CUSTOM LIST
Create, View, and Edit Custom Scan Lists. See Section 6.14.6.
SITE ROAMING
Enable/Disable Wide Area System Scan. See Section 6.14.7.
SITE ALIAS
Select an available site from this list to lock the radio to; i.e., prevent the radio from
roaming. This is also known as Site Lock. See Section 6.14.8 for more information.
SECURITY MENU:
ZEROIZE KEYS
Removes all encryption keys from the radio. See Section 6.20.1.
ENCRYPTION
Enable/Disable encryption. See Section 5.20.
GLOBAL ENCRYPTION
Enable/Disable Global Encryption. See Section 6.20.3.
GLOBAL KEY
Select the Global Key. Only available if Global Encryption is Enabled. See Section 6.20.3.
ACTIVE KEYSET
Select the Active Keyset. See Section 6.20.4.
KEY LIST
View available key lists. See Section 6.20.5
OTAR
Enable/disable Over-the-Air Rekeying (OTAR). See Section 6.20.6.
OTAR REKEY
Request that the KMF updates the keys in the radio. See Section 6.20.6.
KVL Mode
Enables the radio to have keys loaded using the Motorola KVL. See Appendix D.2.3.
KVL Mode LLA
Puts the radio into KVL LLA Mode, allowing the user to load Link-Layer Authentication
(LLA) Keys via a KVL-5000.
MESSAGES MENU:
RADIO STATUS
Used to send a status condition to the site without making a voice call. See Section 0.
RADIO MESSAGE
Used to send a message to the site without making a voice call. See Section 6.16.
TEXTLINK MESSAGES
Allows the user to send a Radio TextLink message. See Section 6.17.
TEXTLINK FORMS
Allows the user to send a Radio TextLink form. See Section 6.17.
TEXTLINK MAILBOX
Contains received Radio TextLink messages. See Section 6.17
FAULTS/ALERTS
Displays radio faults and alerts. See Section 6.18.
