14221-1800-2050, Rev. G
89
6. Press the up or down navigation buttons to highlight the newly added scan list and press the
VIEW/EDIT
soft key.
7. Press the left or right navigation buttons to display the desired system.
8. Press the up or down navigation buttons to highlight the desired group/channel and press the
OPTIONS
softkey. From here, you can add/delete channels from the scan list and set/remove
Priority 1 and Priority 2 channels.
When a custom scan list is selected, that list is scanned any time scanning is
enabled for any Trunked, conventional, or P25 Conventional system. To scan
only the channels assigned to a system, custom scanning must be turned off.
6.14.7 Wide Area System Scan (P25 Trunked and EDACS)
Wide Area System Scan (WASCAN) causes the radio to roam across mobile systems when the
currently selected system's control channel is lost. The radio will scan the control channels of
other systems.
To enable/disable Wide Area System Scan:
1. Press the Menu/Select button to access the main menu.
2. Press the left or right navigation buttons to display the
SCAN
menu.
3. Press the up or down navigation buttons to highlight
SITE ROAMING
and press the
Menu/Select button to toggle Wide Area System Scan
ENABLED/DISABLED
.
4. Select
BACK
to exit the scan menu.
NOTE
