14221-1800-2050, Rev. G
53
5.22 CHANNEL GUARD (ANALOG CONVENTIONAL ONLY)
Channel Guard is L3Harris’ trademark for CTCSS (tone squelch) and CDCSS (digital tone
squelch).
The Channel Guard menu is only accessible if the System is setup for CG SEL
in the radio’s personality.
To select the Channel Guard tone:
1. Press Menu/Select button to access the main menu.
2. Use the left or right navigation buttons to display the
CALL
menu
.
3. Use the up or down navigation buttons to highlight
CHANNEL GUARD
and press the
Menu/Select button.
4. Use the up or down navigation buttons to highlight
RECEIVE GUARD
or
TRANSMIT GUARD
and press the Menu/Select button.
5. Use the up or down navigation buttons to highlight the desired option from the list and select
using the Menu/Select button.
6. The Channel Guard frequency is displayed on the main display.
The Channel Info screen and Channel Edit screen will change depending on this selection. See
Sections 6.4 and 7.3 for more information.
A button on the radio can be programmed for Channel Guard Override (see
Section 7.5).
NOTE
NOTE
