L3Harris NARDA PMM ER8000, User Manual

Page: 54 / 82

7-2 Remote control
7.5 List of
commands
Query COMMANDs
Syntax Function
?3PR* Tells whether the apparatus is a PMM ER8000 and in which mode
?AAT*
Requests the Attenuator status for Analyzer mode.
?ACE*
Requests the Center frequency for analyzer mode
?ADT*
Requests the detector used for Analyzer mode
?AHT* Requests the Hold Time for Analyzer mode.
?AOP* Requests the Stop frequency for analyzer mode
?ART* Requests the Start frequency for analyzer mode
?ASP*
Requests the Span frequency for analyzer mode
?CFA*
Sends back the ID of the conversion factor
?CRA*
Tells whether RMS-AVG detector is available
?DET* Reports the five detector for manual mode
?DMD* Requests the status of demodulator.
?DMV*
Requests the volume of demodulator.
?FPGA
Sends back a string containing information about version of FPGA.
?IDN*
Requests model, release and date of firmware
?LSN Sends back a string showing which Band B input is selected
?MAF* Requests the tuning frequency for manual mode
?MAT* Requests the Attenuator status for Manual mode
?MHT*
Requests the Hold Time for manual mode
?RBW
Sends back a string expressing the selected RBW
?S/N*
Requests Serial Number internally stored by manufacturer
?TAT* Requests the MinAtt value
?TMP Sends back a string showing the temperature expressed in Celsius (°C)
?UHT*
Requests the actual Hold Time currently or lastly used
?UPP*
Requests the status of input PINs of the User Port