L3Harris narda PMM EP-600, User Manual

Page: 95 / 118

Communication protocol 6-5
Table 6-3 Operative Commands
Command Description
@c
This setting command #00@c* temporarily puts the EP-600 in “Storing Mode” allowing
thus storing a new address.
As this permission lasts only for 1 second, the command “I” should be issued closely.
This command has not a reply.
Example of command
#00@c*
@
I
addr
This setting command #00@
I
addr* sets the address used for communication protocol.
It is made of a 2 character string int range “00” to “99”.
Neither spaces nor punctuation are allowed between “#@00” and addr .
This setting command is executed only if sent within 1 second since the command “c”
The reply is the address itself if it has been granted otherwise “ERR” if the EP-600 was
not in Storing Mode
Example of command
#00@0
I53
* which sets the address to “53”. Therefore, all following
commands starting with #53……*, in addition to #00….*, will be granted.