Stormscope
®
WX-1000 Pilot’s Guide
3-8
Chapter 3 – Operation
3. Press the GO button to view the OPTIONS screen (figure
3-7).
4. Press the TEST button to run the operator-initiated self
test.
The
WX-1000
switches to the
SELF-TEST
screen (figure
3-2
) and begins the self test. The
SELF TEST
screen
displays the message
SYSTEM TEST IN PROGRESS
… for
the duration of the test (between
5
and
10
seconds).
If the
WX-1000
detects no faults, the
SELF TEST
screen
displays the message
ALL TESTS ARE OK
(figure
3-3
).
After a few seconds, the display switches back to the
OPTIONS
screen.
If the
WX-1000
detects a fault, an error message is dis-
played. Refer to page
3-13
for more information on error
messages. Once you’ve pressed any button to acknowl-
edge the error message, the display switches back to the
OPTIONS
screen.
Use the Checklist Feature
Before you can use the checklist feature, you must fill out
checklist worksheets (figure
3-8
), then ask your
S
tormscope
dealer to enter the checklists into your
WX-1000
using
specialized equipment. Keep a copy of the worksheets in
your aircraft at all times. Any time you want to change
your checklists, have your dealer enter the changes.
WX - 1000/1000+
Checklist Worksheet
78-8060-5815-8 (Rev. 01)
Stormscope
®
Series II
Weather Mapping Systems
Checklist No.
Aircraft Registration No.
Title
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11
Instructions
Use this worksheet to specify
desired checklist items to be
programmed by your dealer in your
Stormscope
®
Series II Weather
Mapping System, Model WX-1000
or WX-1000+
1. Enter checklist number and title
at the top.
2. Enter aircraft registration
number.
3. Enter desired checklist items
in
the order in which you want
them entered
(one item per
line).
Figure 3-8. WX-1000 Checklist Worksheet Sample
Use the Checklist Feature
