Stormscope
®
WX-1000 Pilot’s Guide
3-4
Chapter 3 – Operation
If the
WX-1000
detects no faults, the
SELF-TEST
screen
(figure
3-3
) displays the message
ALL TESTS ARE OK
.
After a few seconds, the display switches to the
MAIN
MENU
screen (figure
3-4
).
If the
WX-1000
detects a fault, an error message is displayed.
Refer to page
3-13
for more information on error messages.
The
WX-1000
may complete its power-up self test before the
CRT
comes on. In this case, it is possible that the first screen you
see will be the
MAIN MENU
screen or an error message resulting
from the self test.
Adjust the Screen Brightness
1. Rotate the OFF/BRT knob clockwise to increase the bright-
ness of the display or counterclockwise to decrease the
brightness of the display.
Adjust the Screen Brightness
S E L F - T E S T
W X - 1 0 0 0
S Y S T E M
T E S T
I N
P R O G R E S S
.
.
.
A L L
T E S T S
A R E
O K
BRT
OFF
Figure 3-3. All Tests Are OK
S T O R M S C O P E
M A I N M E N U
1 2 0 °
G O
N E X T
3 6 0 °
T i m e / D a t e
O p t i o n s
C h e c k l i s t s
BRT
OFF
Figure 3-4. MAIN MENU Screen
NOTE
