L.T. Rich Products Z-Spray, Owner'S Manual

Page: 8 / 36

Periodically tighten all nuts, bolts and screws and check that all fasteners are properly
installed to ensure that the Z-Spray is in safe operating condition.
Never perform maintenance on the Z-Spray while parking brake is disengaged .
**Refueling your Z-Spray**
Use only approved gasoline container.
Never remove the gas cap or add fuel with the engine running.
Extinguish all cigarettes, cigars, pipes, and other sources of ignition.
Never fuel the machine indoors.
Allow the engine to cool before refueling.
If fuel is spilled on clothing, change clothing immediately
If fuel is spilled, do not attempt to start the engine. Contain, remove and verify that all
fuel has been removed before starting the machine.
Remove Fuel Tank Cap
Place a funnel in the Fuel Tank receptacle
Slowly pour the fuel from the container into the receptacle. Don not pour to fast causing a
spill (funnel will allow only so much fuel to drain into Fuel Tank)
Replace Fuel Tank Cap and screw on tight.
2.5 Storage Safety Rules
**use fuel stabilizer if machine will sit for more than 30 days**
Never store the Z-Spray in any area accessible by children.
Never store the Z-Spray with fuel in the tank inside a building where fumes could reach
an open flame or spark.
Allow the Z-Spray engine to cool before storing in an enclosed area.
Lubricate all moving parts of the Z-Spray to prevent rust during storage.
Remove all accumulated debris from the Z-Spray and attachments before storing.
SECTION 3 MAINTENANCE (Maintenance Chart in the back of manual)
3.1 Engine Maintenance (Vanguard 16HP or 18HP)
**USE COMPRESSED AIR (NOT WATER) WHEN CLEANING ENGINE**
Use only original equipment replacement parts. Other parts may not perform as
well, may damage unit, and may result in injury
Page 4