L.T. Rich Products Z-Spray, Owner'S Manual

Page: 6 / 36

1.4
Component Manufactures’ Warranty
Some of the component parts of the Z-Spray may be warranted by their respective
manufactures. These parts are:
Hydro-Gear Pumps/Motors ( www.hydro-gear.com )
Parker Wheel Motors ( www.parker.com )
Vanguard Commercial Engines ( www.briggsandstratton.com )
Delavan Ag Pump/REMCO Industries Pumps ( www.delavanagpumps.com or
www.remcoindustries.com )
The complete manufactures’ warranty information for these components is located in the
back of this manual. Contact L. T. Rich Products, Inc if you have any questions
concerning warranties on these component parts.
1.5 Conditions Which Void Warranty
This warranty shall not apply to equipment which:

Has had repairs or modifications not authorized by L. T. Rich Products, Inc

Has been subject to abuse, improper maintenance, or improper applications

Has had engine repair work done by
“unauthorized”
service dealer
1.6 Warranty Exceptions
This warranty shall not apply to the following items:

Wear items including sparks plugs, points & condensers, fuses, batteries, belts,
filters, bearings, tires, lubricants and fluids.

Damages to engine/drive systems caused by a lack of/or improper lubricants
and/or fluids.

Damages to engine/drive system caused by improper operations and/or
maintenance.
SECTION 2 SAFETY INFORMATION
2.1 About This Manual
The purpose of this manual is to assist you in properly and safely operating and
maintaining the Z-Spray. Read and understand this entire manual before attempting to
set-up, operate, adjust, perform maintenance on, or store the Z-Spray. This manual
provides essential information and instructions, which will help you enjoy years of
dependable performance from the Z-Spray.
The designed and tested safety of the Z-Spray is dependent upon its operations within the
parameters and limitations explained in this manual. Be familiar with and follow all
safety rules in this manual as well all safety rules for any related equipment.
Although these instructions have been complied through extensive field experience and
engineering data, some information presented herein may be generated in the nature due
to unknown and/or varying operating conditions. However, these instructions, combined
with your increased experience with the Z-Spray, will enable you to develop procedures
suitable to your particular application.
Page 2