STEP 1
Read through these instructions thoroughly.
We have found this to be of great value when
first assembling this product.
STEP 2
Remove all parts and hardware from packing
material. Wooden pieces should be placed
on a non-abrasive surface (like the carton or
carpet) to prevent damage to the finish.
STEP 3
Identify all parts using diagram at right
(A) Back Assembly
(B) Back Legs
(C) Right Arm
(D) Left Arm
(E) Seat Assembly
(F)
Front Leg Assembly
STEP 4
Identify and count hardware using diagram at
right.
Assembly of this product requires a 7/16"
wrench (or adjustable wrench). Having
someone assist you by holding parts in place
during installation will make the process
easier.
NOTE: Make sure all parts are correctly
lined up before tightening.
STEP 5
Stand Seat Assembly (E) up on
edge as pictured on right. Insert
joint connector through bottom
predrilled hole of back leg (B) as
shown on right, then through the
bottom predrilled hole on the
back of the Seat Assembly. Do
not fully tighten. Repeat for the
other back leg (B).
