STEP 9
Insert two 1-3/4” Lag Bolts with
washers through the predrilled holes
in the back arm cleats (C, D), then
into the predrilled holes of the
middle back cleat of Back
Assembly (A).
**Tighten all lock nuts and screws
securely on chair.
CARE
Thank you for choosing our classic L.L.Bean
Adirondack furniture. The natural finished
furniture is made of solid oak and finished
with a wood preservative. This oak
hardwood will gray slightly as it ages.
Painted furniture is made of maple hardwood
and finished with a rugged weather-resistant
acrylic paint. All of our Adirondack
Furniture is made in the United States.
Recommendations for extending the life of
your furniture:
•
During inclement weather and
off-season, bring furniture indoors
or use a furniture cover.
•
Over time, wood exposed to the
ground will absorb moisture,
which may cause rot. If you use
this chair on a lawn, occasionally
move it to a dry surface (patio or
deck) to allow the legs to dry out.
•
A deck, porch, or patio is the best
location for your furniture.
•
To clean, wipe accumulated dirt
with a solution of warn soapy
water and a soft cloth; rinse
thoroughly with clean wa
ter.
Over time your Adirondack furniture will need
refinishing. We recommend the following:
•
Lightly sand each piece with a fine grade of
sandpaper before applying paint or finish. You
do not have to sand down to bare wood.
•
On painted furniture apply a primer first. Finish
with an outdoor weather resistant acrylic paint.
The original paint color can be matched at your
local hardware or paint store.
•
If you have solid oak furniture, sand and finish
with any high-grade wood preservative.
www.llbean.com
Product Support 1 800 341 4341