background image

Attention

This heater has been tested and 
evaluated by the CSA Group in 
accordance with the requirements 
of Standard ANSI Z83.7 • CSA 2.14 
and is listed and approved as a 
direct gas-

fi

 red forced-air 

construction heater with application 
for the temporary heating of build-
ings under construction, alteration, 
or repair. The heater shall NOT 
be used with ductwork. CHECK 
WITH YOUR LOCAL FIRE SAFETY 
AUTHORITY, YOUR LOCAL FUEL 
GAS SUPPLIER, OR THE 
L.B. WHITE COMPANY IF YOU 
HAVE QUESTIONS REGARDING 
APPLICATIONS. 
This Owner’s Manual provides 
instructions for Tradesman 
propane-vapor and natural gas 
heaters. Instructions pertaining to 
a speci

fi

 c model or gas con

fi

 gura-

tion are noted. Unless noted, the 
information applies to all versions of 
Tradesman heaters.

www.lbwhite.com

SCAN THIS

with your smartphone or
visit http://goo.gl/nvneR 
to view maintenance
videos for L.B.White heaters.*

WORLD PROVIDER - INNOVATIVE HEATING SOLUTIONS

411 Mason Street, Onalaska, WI, U.S.A 54650  •  800-345-7200  •  608-783-5691  •  608-783-6115 (fax)  •  www.lbwhite.com

Congratulations!

You have purchased the 

fi

 nest portable forced air construction 

heater available. Your new L.B. White heater incorporates the 
bene

fi

 ts from the most experienced manufacturer of heating 

products using state-of-the-art technology.

We, at L.B. White, thank you for your con

fi

 dence in our products 

and welcome any suggestions or comments you may have...
call us, toll-free, at (800) 345-7200.

Tradesman

 

Standard and Ultra 

Construction Heater

Model

CP170
CP400

CP170

Btu/h/kW

170,000/49.8

400,000/117.2

155,000/45.4

Fuel

Propane Vapor 

Withdrawal

Natural Gas

Owner’s Manual and Instructions

View this manual online at www.lbwhite.com

*  Requires an app like QR Droid

for Android or for iPhone

SEE ASSEMBLY

INSTRUCTIONS

INSIDE

Please refer to important

elevation information on 

inside cover.

North 

American

Made

Summary of Contents for Tradesman CP400

























































































































Reviews: