background image

Contact your local L.B. White dealer for replacement parts
and service or call the L.B. White Co., Inc. at (800) 345-7200
for assistance.  Be sure that you have your heater model
number and configuration number when calling.

L.B. White Co., Inc. warrants that the component parts of its
heater are free from defects in material and workmanship,
when properly installed, operated, and maintained in
a c c o rd a n c e   w i t h   t h e   I n s t a l l a t i o n   a n d   M a i n te n a n c e
Instructions, safety guides and labels contained with each
unit.  If, 

within 12 months from the date of purchase by

the end user

, any component is found to be defective,

L.B. White Co., Inc. will at its option, repair or replace the
defective part or heater, with a new part or heater, F.O.B.,
Onalaska, Wisconsin.

A warranty card on file at L.B. White will automatically
qualify a unit and its component par ts for warranty
consideration.  If a warranty card is not on file, a copy of the
b i l l   o f   s a l e   w i l l   b e   r e qu i r e d   to   e s t a b l i s h   wa r r a n t y
qualification.  If neither is available, the warranty period will
be 12 months from date of shipment from L.B. White.

Warranty Policy

Replacement Parts and Service

HEATER

PARTS

L.B. White Co., Inc. warrants that replacement par ts
purchased from the company and used on the appropriate
L.B. White equipment are free from defects both in material
a n d   wo r k m a n s h i p   fo r  

1 2   m o n t h s   f r o m   t h e   d a t e   o f

purchase by the end user

. Warranty is automatic if a

component is found defective within 12 months of the date
code marked on the part.  If the defect occurs more than 12
months later than the date code but within 12 months from
the date of purchase by the end user, a copy of a bill of sale
will be required to establish warranty qualification. 

The warranty set forth above is the exclusive warranty
provided by L.B. White, and all other warranties, including
any implied warranties or merchantability or fitness for a
particular purpose, are expressly disclaimed.  In the event
any implied warranty is not hereby effectively disclaimed
due to operation of law, such implied warranty is limited in

duration to the duration of the applicable warranty stated
above.  The remedies set forth above are the sole and
exclusive remedies available hereunder.  L.B. White will not
be liable for any incidental or consequential damages
directly or indirectly related to the sale, handling or use of
the equipment, and in any event L.B. White's liability in
connection with the equipment, including for claims based
on negligence or strict liability, is limited to the purchase
price.

Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above
limitation or exclusion may not apply to you.  This warranty
gives you specific legal rights, and you may also have other
rights which vary from state to state.

31

Summary of Contents for GreenGro Plus HD220

































Reviews: