Remote Fuel Hook-up Foreman 230/500 Oil
Installation Instructions •Remote Fuel Hook-up Foreman 230/500 Oil
www.lbwhite.com
Installation Instructions •
Remote Fuel Hook-up Foreman 230/500 Oil
2
A. Initial Preparation:
1. Have a sufficiently large enough fuel resistant
container ready to catch any fuel expelled from the
pump during removal of the hoses.
2. Disconnect the heater’s electrical supply.
B. Pre-assemble the Remote Fuel Hook-Up
• Attach the hose adapter fittings provided with the kit
to the remote fuel hook-up. See Figure 1.
FIG. 1
C. Disconnecting Fuel Hoses
1. Disconnect the return fuel hose at the elbow and
from the pump. Save this hose to be used later.
2. Remove the elbow from the tank and cap off the
nipple with the 3/8” cap provided with the kit.
If you are attaching an external fuel tank to
the heater, continue to C3. Otherwise, skip
to section C8.
3. Remove the hose connection from the inlet of the
fuel filter.
DO NOT
remove the hose connection
at the elbow of the fuel tank.
4. Remove the bushing and the hose adapter from
the inlet of the fuel filter.
5. Attach the previously removed hose adapter
and bushing from step 4 to the hose’s swivel nut
removed in step 3.
6. Slide the ring of the blue cap onto the hose.
Hose
Adapter Fittings
Swivel Nut
Hose Fitting
DO NOT
REMOVE
Bushing
Hose
Adapter