![background image](http://html1.mh-extra.com/html/l-b-white/cp400ak/cp400ak_owners-manual-and-instructions_3144166013.webp)
EXTRA ELECTRIC OUTLET
(For CP400AK only)
• Always cover electrical outlet when not in use. See Figure 12.
• Don't plug and use an appliance with more than 5A current in this
outlet.
WARNING!
Shock hazard
■
Always cover outlet when not in use.
Figure 11 – Extra Electric Outlet
Cover
Electric Outlet
LONG-TERM STORAGE OF YOUR HEATER
FUEL TANK DRAIN
1.
Remove drain plug from rear bottom side of fuel tank by
pulling plug grip downward and drain. See Figure 12.
2.
Using a small amount of kerosene, swirl and rinse the
inside of the tank.
NEVER MIX WATER WITH KEROSENE, as it will cause rust inside
the tank. Pour the kerosene out, making sure that you remove it
all.
IMPORTANT: Do not store kerosene over summer for use during
next heating season. Using old fuel may damage heater.
3.
Reinstall drain plug as follows:
- Insert plug’s seal head fully into drain hole so that flange is
flush
to tank’s bottom. See Figure 13.
- Insert seal cap fully into head hole so that cap flange is
flush to head flange. See Figure 13.
IMPORTANT: Reinstall plug fully into hole in tank; otherwise it
will not seal completely.
- Make sure storage place is free of dust and corrosive fumes.
- Store the heater in the original box with the original packing
material and keep USER’S MANUAL with heater.
OPERATION (cont.)
Figure 12 – Drain Plug Removal
Drain Plug
Plug Grip
Rear Bottom
Side Fuel Tank
Figure 13 – Drain Plug Reinstall
Drain Hole
Fuel Tank
Seal Head
Head Flange
Head Flange
Head Hole
Seal Cap
Cap Flange
4
13