Galvanized Box Fans
Owner’s Manual • Galvanized Box Fans
3
DANGER
BEFORE INSTALLING OR SERVICING, ALWAYS LOCK OUT AND TAG POWER SOURCE. DO
NOT RELY ON A SWITCH AS THE ONLY MEANS OF DISCONNECTING POWER. FAILURE TO
DISCONNECT POWER CAN RESULT IN FIRE, ELECTRICAL SHOCK OR SERIOUS INJURY.
MOTOR WILL RESTART WITHOUT WARNING AFTER THERMAL PROTECTOR TRIPS. DO NOT
TOUCH AN OPERATING MOTOR AS IT MAY BE HOT ENOUGH TO CAUSE INJURY. DO NOT
PLACE ANY BODY PARTS OR OBJECTS IN FAN OR DRIVE COMPONENTS WHILE FAN IS
CONNECTED TO A POWER SOURCE.
WARNING
■ READ AND FOLLOW ALL INSTRUCTIONS, CAUTIONS, DANGERS AND WARNINGS. FAILURE
TO DO SO COULD RESULT IN PERSONAL INJURY, DEATH OR PROPERTY DAMAGE.
■ MAKE SURE THE ELECTRICAL POWER SOURCE CONFORMS TO THE REQUIREMENT OF
THE FAN(S) AS WELL AS LOCAL CODES.
■ ELECTRICAL CONNECTIONS, INSTALLATION AND MAINTENANCE MUST BE DONE BY
QUALIFIED ELECTRICAL PERSONNEL IN ACCORDANCE WITH ALL APPLICABLE CODES AND
ORDINANCES.
■ UNIT MUST BE ADEQUATELY GROUNDED.
■ TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS FAN TO
WATER.
■ DO NOT TOUCH ELECTRICALLY LIVE COMPONENTS.
■ FREE ROTATION OF THE PROPELLER IS CRITICAL. IT MUST NOT TOUCH ANY PART OF THE
VENTURI OR FRAMEWORK.
■ ASSURE THAT ALL POWER CORDS DO NOT COME IN CONTACT WITH ANY SHARP EDGES,
HOT SURFACES OR CHEMICALS. IMMEDIATELY REPLACE ANY DAMAGED CORDS.
CAUTION
OSHA REQUIRES OSHA COMPLIANT GUARDS WHEN FAN IS INSTALLED WITHIN 7FT OF THE
FLOOR OR WORKING LEVEL.
WARNING
Cancer and reproductive harm.
See
www.P65Warnings.ca.gov
