K2_RM_EN_0.5
w w w . l - a c o u s t i c s . c o m
4 5 / 52
APPENDIX B:
INSTALLING A LASER INCLINOMETER
The K2 rigging system is compatible with the following laser inclinometers:
TEQSAS
®
LAP-TEQ
(part of the L-ACOUSTICS
®
TECH TOOLCASE)
SSE
®
ProSight
TEQSAS
®
LAP-TEQ
XLR 3 cable
T20 Torx key
Medium-strength thread-locker (blue)
1.
Remove the four M4 Torx screws (T20) from the plate.
2.
Put thread-locker in the four threaded inserts.
3.
Position the LAP-TEQ so it points toward the front of the K2-BUMP.
4.
Secure the LAP-TEQ with the four screws.
5.
Connect the XLR 3 cable to the sensor.
6.
Follow the manufacturer instructions to calibrate the inclinometer.