Rigging procedures
Mounting SB10r in a ceiling with SB10r inCeiling
type of deployment
ceiling-mounting
rigging accessories
SB10r inCeiling, including:
• SB10r enclosure
• SB10r-inC rigging accessory
• plastic frame
• SB10r-Screen
• 2 set-up bracket tools
• cardboard cutting template
4 max. Ø6 mm / 0.24 in threaded rods
8 corresponding nuts
4 drywall or wood screws
4 M6x16 Torx screws (provided)
additional material
1 M4x12 Torx screw (provided)
torque screwdriver
T30 Torx bit
tools
T20 Torx bit
min. number of operators
2
SB10r-Screen is secured with barbed push fasteners compatible with drywall sheets up to 13 mm / 0.5 in thick.
Additional barbed push fasteners are provided for drywall sheets up to 30 mm / 1.2 in thick. Refer to
C: Replacing SB10r-Screen barbed push fasteners
(p.53) for instructions on how to replace the barbed push
fasteners.
240 mm / 9.4 in of room are required between the main ceiling and the secondary ceiling to install the enclosure
assembly.
m
in
. 2
40
m
m
/ 9
.4
in
SB10r owner's manual (EN) version 1.1
27
Summary of Contents for SB10r
Page 1: ...SB10r owner s manual EN...
