LA4X
Amplified Controller
user manual
VERSION 4.0
LA4X_UM_EN_4.0
w w w . l - a c o u s t i c s . c o m
38
4.10.1
SPK HANDLING
This page displays the
RMS voltage
measured at each individual amplifier circuit output as a percentage of the
maximum voltage supported by the particular speaker section connected to it.
For example, in Figure 38 the
RMS voltage
of channels
OUT 1
to
OUT 4
is respectively 12, 10, 13, and 11 % of the
maximum values.
4.10.2
OUT CH TEMP
This page displays the
temperature
of each individual amplifier channel circuit as a percentage of the maximum
operating temperature: 60°C = 100 %.
For example, in Figure 38 the
temperature
of channels
OUT 1
to
OUT 4
is respectively 52, 53, 50, and 48 %.
4.10.3
FIRMWARE
This page displays the version of LA4X firmware in use in the controller.
For example, Figure 38 shows LA4X firmware version
1.0.3.3
.
Network
Always ensure that all LA4X controllers used in a given network run the same firmware version.
4.10.4
PRESET LIBRARY
This page displays the version of the preset library in use in the controller.
For example, Figure 38 shows preset library version
4.2
.
PRESET LIBRARY description
Refer to the
PRESET GUIDE
for full description of the
factory presets
.
4.10.5
MAC ADDRESS
This page displays the MAC (Media Access Control) address of the amplified controller. This address (unique to each
controller) is the equivalent of a serial number and identifies the controller internationally. It is set by the manufacturer
and cannot be modified.
For example, in Figure 38 the MAC address is
00:1B:92:01:90:3A
.
