LA4X_UM_EN_4.0
w w w . l - a c o u s t i c s . c o m
29
4.4
LOAD PRESET
A preset can be loaded from the following menu pages:
Table 7: LOAD PRESET pages
Page
Memory range
Contents
LOAD PRESET USER
1 – 10
(read and write)
User presets
stored by the user (see section 4.5).
LOAD PRESET FACTORY
11 – 199
(read only)
Factory preset library
created by L-ACOUSTICS
®
and
automatically installed during firmware update (refer to
the
LA NETWORK MANAGER video tutorial
).
To load a preset, follow these steps (see also Figure 26):
From the main menu, select
LOAD PRESET USER
or
LOAD PRESET FACTORY
.
1.
If the controller displays
NO PRESETS AVAILABLE!
when you select
LOAD PRESET USER
, it means that all
user
memories
are empty. Press the
ESC
key to abort.
— END —
Else
, continue the procedure.
Turn the
encoder wheel
to scroll through the presets.
2.
Press the
OK
key or the
encoder wheel
to select a preset (or
ESC
to abort).
3.
The controller displays
ARE YOU SURE?
.
Press the
OK
key or the
encoder wheel
to validate (or
ESC
to abort).
4.
If the controller displays the
main screen
,
it means that the preset has been successfully loaded.
— END —
If the controller displays
CLEAR GROUP PARAM? OUTPUTS MUTED!
,
it means that it has been assigned to
groups
(see section 4.3.1, group information) and that it is
no longer
connected to L-NET (see section 4.2.3).
Press the
OK
key to load the preset while
clearing
the group parameters, or press the
ESC
key to load the
preset while
keeping
the group parameters active.
— END —
If the controller displays
GROUP CONFLICT! CLEAR GROUP PARAM?
,
it means that its
output channels
have
been assigned to
groups
(see section 4.3.1, group information) and that the assignation structure is
not
compatible
with the
channel sets
of the preset to load (see section 4.7). Thus, loading the preset is only
possible if the group parameters are cleared.
Press the
OK
key to load the preset while
clearing
the group parameters, or press the
ESC
key two times to
abort.
— END —
If the controller displays
GROUP CONFLICT! CANNOT LOAD PRESET
,
it means that its
output channels
have
been assigned to
groups
(see section 4.3.1, group information) and that the assignation structure is
not
compatible
with the
channel sets
of the preset to load (see section 4.7). Moreover, as it is
connected
to L-
NET (see section 4.2.3), it is not possible to cancel the group parameters to allow loading the preset.
Press the
ESC
key to abort.
— END —
