LA4X_UM_EN_4.0
w w w . l - a c o u s t i c s . c o m
25
Gain control
In quick access mode,
gain
control applies for sets of output channels having input channels in common in their input
selections (see also section 4.2.1). The
gain
control procedure is the following:
From the main screen, press and hold the chosen output key, say OUTx.
1.
The LCD displays the
gain
values of all output channels having in their input selection an input channel in common
with the input selection of OUTx.
Turn the encoder wheel to modify the
gain
values and simply release the key to return to the main screen.
2.
Figure 19: Setting the OUT 3 gain
Additional information about gain control
Quick access
gain
control is only available from the
main screen
.
Gain values can be set at 0.1 dB resolution (
simply turn the encoder wheel) or 1 dB resolution
(
simultaneously press and turn the encoder wheel).
Examples of output channels routed to the same input, see Figure 20:
Pressing OUT1 will select OUT1, OUT3 and OUT4 (containing A).
Pressing OUT2 will select OUT2, OUT3 and OUT4 (containing B).
Pressing OUT3 or OUT4 will select all channels (containing A or B).
Individual
gain
settings are available from the PRESET PARAMETERS menu (see section 4.7).
Figure 20: Multiple input selections
Identification
If the controller is connected to an L-NET network, it can be identified among other controllers in the workspace of
LA NETWORK MANAGER (refer to the
LA NETWORK MANAGER video tutorial
).
Press and hold the
encoder wheel
from the main screen to launch the
Identification
function.
The controller flashes in yellow in the workspace of LA NETWORK MANAGER.
While pressing the encoder wheel, the L-NET and OUT LED flash and the LCD screen displays
IDENTIFICATION
and the
IP address
of the controller (see Figure 21).
Figure 21: Launching the Identification function
