Corrective maintenance
Corrective maintenance
Introduction
Presentation
This section is intended for end users and gathers the level 1 procedures.
This manual contains the maintenance operations authorized for the end user.
Performing another operation exposes to hazardous situations.
(p.29)
This section contains the diagnosis tables and procedures to identify the issues and how to address them.
L-ISA Processor II exploded view
(p.32)
This illustration gives an overview of the order in which the elements must be disassembled and reassembled. Each
assembly refers to the corresponding D/R procedure and the necessary repair kit(s).
Disassembly and Reassembly procedures
(p.33)
This section contains the maintenance procedures for each assembly identied in the exploded view.
Inspection and preventive maintenance
(p.16)
These checks allow to detect an issue. The quality control must be performed regularly.
Equipment and tools
Equipment
Before performing maintenance on this product, make sure all the equipments listed are available.
• computer with L-ISA Controller (version 2.3 minimum) and CAT5e U/FTP cable
Tools
Before performing maintenance on this product, make sure all the tools listed are available.
Reference are given for FACOM
®
products in this table. Other manufacturers can be used.
name
reference
distributor
torque screwdriver (0.5 - 2.5 N.m)
A.402
FACOM
set of 6-point 1/4" sockets
RL.NANO1 / R.360NANO
FACOM
28
L-ISA Processor II owner's manual (EN) version 1.0
