L-Acoustics L-ISA Processor II, Owner'S Manual

Page: 21 / 44

Installation
Network conguration
L-ISA Controller receives data on UDP port 8880. This is required to connect to the L-ISA Processor II, L-ISA Plugins, or
any external control device (DeskLink, Trackers, OSC).
For L-ISA Plugins to work, the hosting DAW and L-ISA Controller must be able to use UDP port 9438 over multicast IP
address 239.255.139.81.
It is strongly advised to only use qualied unmanaged switches like LS10. However, if a managed switch is used
in the infrastructure, it needs to have the option "IGMP snooping" deactivated. Otherwise, connection timeouts
can occur between the controller and the plugin, or the processor may appear partially ofine on the L-ISA
Controller.
L-ISA Controller needs an Internet connection in order to activate the license.
For emergency license activation through L-ISA Processor II, the L-ISA Controller and L-ISA Processor II must be able to use
UDP port 11389 over multicast IP address 239.255.84.167.
L-ISA network using xed IP
LA Network Manager
L-ISA Controller
DAW
L-ISA Source
Control Plugins
L-ISA Processor II
LS10
(FOH)
L-Acoustics amplified
controllers
fixed IP
DeskLink
LS10
primary network
LS10
secondary network
fixed IP
fixed IP
fixed IP
fixed IP
fixed IP
fixed IP
control (Ethernet)
AVB + control (Ethernet)
AVB (Ethernet)
The L-ISA Processor II xed IP is set to 192.168.1.100 as default.
L-ISA Processor II owner's manual (EN) version 1.0 21