manualshive.com logo in svg

L-Acoustics K2, Owner'S Manual, Page: 85 / 192

Share
Download
L-Acoustics K2 Owner'S Manual Download Page 85

Rigging procedures

F - Stacking K2 on K2-BUMP

min number of operators

2

Procedure

1.

Prepare a block of 4 K2. Refer to 

A - Preparing a block of 4 K2

 (p.69).

2.

Preset the inter-enclosure angles. Refer to 

B - Preset the inter-enclosure angles

 (p.73).

3.

Prepare the K2 block top enclosure:

a) Take out and lock the rear and front rigging arms.

b) Dene the K2 stack site angle with the rear rigging arm.

For the top enclosure of the stack, select a value between 0.25 and 7.5 and subtract 3 to obtain the nal site

angle. For the other enclosures, select the angle normally.

Final site angle for top enclosure

authorized angles

nal site angles

0.25°

-2.75°

1°

-2°

2°

-1°

7.5°

4.5°

3°

0°

4°

1°

5°

2°

-2.75°

0°

+2°

+1°

+4.5°

-2°

-1°

K2 owner's manual (EN) version 1.1 

 85

Summary of Contents for K2

































































































































































































Reviews:

No comments