XT
COAXIAL RANGE -
P
SELF-POWERED COAXIAL RANGE
Rigging Procedures
VERSION 1
XTP_RM_ML_1
w w w . l - a c o u s t i c s . c o m
16 en
6.3
Rigging the SB15P enclosure with the ETR15P
6.3.1
Assembling
The ETR15P is secured to the SB15P enclosure in the following way:
1.
Remove the recessed set screw located on the bottom face of the enclosure.
Note:
Put the screw in a safe place.
Figure 13: Recessed set screw
2.
Pull on the U-bracket’s locking pin and open the pivoting arm.
Figure 14: Opening the pivoting arm
Recessed set
screw
Summary of Contents for 8XT
