XTP_RM_ML_1
w w w . l - a c o u s t i c s . c o m
15 en
EN
3.
Select the desired enclosure’s orientation (10° steps angle selection) and secure the locking pin to the enclosure
through the U-bracket’s pivoting arm.
Figure 12: Selecting and securing the enclosure’s orientation
The locking pin must be located on the
pivoting arm
(and
not
on the fixed arm) to secure the
U-bracket to the enclosure.
Verify that the enclosure is secured to the U-bracket by checking that the locking pin is engaged
and cannot move freely.
L-ACOUSTICS recommends using an additional safety point when rigging enclosures.
A safety eye-bolt accessory can be added using the 8mm/0.31in insert located on the rear face
of the 12XT enclosure (see Figure 18).
6.2.2
Disassembling
Disassembling should be carried out in the reverse order of assembly.
Select the
enclosure
angle in 10°
steps
!
WARNING
!
WARNING
Summary of Contents for 8XT
