12XTI_UM_ML_1-0
w w w . l - a c o u s t i c s . c o m
9
9
9
9 en
EN
6
6
6
6
INSTALLATION
INSTALLATION
INSTALLATION
INSTALLATION
6.1
Flying or stacking the 12XTi
The inserts and the wedge-shaped cabinet design of the 12XTi enclosure (Figure 2) allow various setups such as:
••••
Wall or ceiling-mounting using the
L-ACOUSTICS
®
ETR12XTi
mounting accessory.
••••
Wall or ceiling-mounting using the
OMNIMOUNT
®
120.0 SERIES
mounting accessories.
••••
Pole mounting using the
L-ACOUSTICS
®
EMBi
35 mm/1.4 inch socket.
••••
Stacking with two fixed angle settings of 30° and 60° with regard to the vertical.
Refer to the
“XTi’’
rigging procedures manual
before installing an enclosure.
6.2
Connecting speakers
The 12XTi enclosure is driven and powered by the dedicated
L-ACOUSTICS
®
LA4
amplified controller. Each LA4
amp channel can drive one 12XTi enclosure. For more details, please, refer to the
“LA4’’
user manual
also available
on the L-ACOUSTICS
®
web site at
www.l-acoustics.com
.
The 12XTi enclosure is equipped with 4-point Speakon
®
connectors allowing connection with the LA4 amplified
controller using one of the
L-ACOUSTICS
®
SP.7, SP10, or SP25
cables (see Figure 1 and Figure 3).
A maximum of
one 12XTi
enclosure can be connected per
LA4 output channel
.
The L-ACOUSTICS
®
wiring convention is as follows:
Speakon
®
connector labels
Connection to transducers
1+
IN +
1-
IN -
2+
Not used
2-
Not used
!
CAUTION
!
WARNING
