KZ RV SPORTSMEN, Owner'S Manual, Page: 46 / 101

39
Supplement your battery by either one of two choices:
1. Hook up a 120-volt AC power cord to recreational vehicle for
converter operation.
2. Use 12 - volt power through the tow vehicle to the recreational
vehicle battery or batteries.
Either of these methods will help ensure maximum electrical power
for the slide-out motor, as well as maintain your battery.
TRAILER SET-UP REQUIREMENTS - GENERAL
Note:
1. Before operating the slide-out room, level the trailer front-to-rear
and side to side.
2. Extend all stabilizer jacks to make solid contact with the ground
and/or on solid blocks. Placing stabilizer jacks onto a hard
surface allows the coach to remain square and assure a good
weather tight seal between the room and trailer sidewall.
BELOW FLOOR SLIDE SYSTEM
Mechanical Components.
Below floor slide-out mechanism consists of a track welded to a
frame cross member, matching with a gear on drive shaft assembly.
Motor and gear box are mounted on a ram attached to bracket, to
move room in or out Operation is identical on both systems. As
motor turns, a ram moves the gear on the track. A cross shaft, front
to rear ram connects the second ram, moving the opposite end of
slide. Mechanism operates the same, flush or standard floor.
ABOVE FLOOR SLIDE-OUT (ALL BRANDS AND TYPES)
This system operates on an inside ram assembly on a track moved
by a cog gear. Ram is attached to the floor and side wall with a
moving track attached to the slide-out. On larger slides, two (2)
rams will be used with cross shaft connecting the 2 rams. A steel
frame carriage style is used on some models, doing same function
generally as a 12’ slide. Access to these components is inside of
coach, under slide floor.
PDF created with pdfFactory trial version www.pdffactory.com