Beijing Kystar Technology Co., Ltd.
59
7.12 Correction and fusion
When using a projector as an output, because of the characteristics of the projection,
the picture needs to be corrected. If there are multiple projection outputs, the
overlapping part needs to be fused. Kommander provides screen-based correction and
fusion settings.
The entrance position is "Screen Management"-Select Screen-"Fusion Correction",
the following window pops up:
Geometric correction provides three modes: linear correction, full correction, and
perspective correction. Linear correction is recommended for planar projection, full
correction is recommended for curved projection, and perspective correction is
recommended for perspective effects. Support manual adding point (press ctrl to add
point).
The blending setting supports adding standard blending bands of up, down, left,
right, and special blending bands of circles and polygons. Supports moving, zooming,
and rotating the fusion zone; adding or deleting control points of the fusion zone;
adjusting the edge curve of the fusion; supporting red, green, blue, and grayscale
adjustment.
