KLS12 manual
www.kystar.com.cn
13
M1
⑥
M5
○
0
M6
○
c
M4
⑨
M3
⑧
M2
⑦
Note: Mode 1 is the data that is started by default when the device is powered on. It is recommended that the
most commonly used or the mode that needs to be displayed when booting is saved to Mode 1.
At this point, the basic debugging of the equipment is completed. If there are other
requirements, repeat the operation and save it to other modes.
After the equipment is debugged, the saved data can be called according to different
scenarios in later use.
There are two types of mode calls:
（
1
）
To call through the shortcut keys, just click the front panel keys "M1-M6", this method
is convenient to use when there are few mode scenes.
（
2
）
Called via user mode within the main menu. Click "MENU" and select "User Mode" to
enter the user mode calling interface. Select the desired mode and click "OK".
Thank you again for using our company's video processor. Please refer to the following
sections for other detailed settings.
