IMPORTANT SAFEGUARDS
Always operate your KYOWA Coffee Maker from a power source of the
same voltage and frequency rating as indicated on the rating label.
Place the Coffee Maker on a flat surface and far from the edge of counter
top.
Do not operate the Coffee Maker if any part of it has been damaged.
Return the appliance to the nearest authorized dealer or service facility for
repair.
Do not use or replace accessories other than the ones originally provided.
Never leave the Coffee Maker unattended when in use.
Avoid touching hot surfaces of the Coffee Maker during use. Use the
cover or handle only.
Never use your Coffee Maker without filling in water first.
Be careful to avoid steam coming out from the Coffee Maker.
Do not operate or place any part of your Coffee Maker on or near any hot
surface such as gas or electric burner, hotplate or heated oven.
Never put carafe inside microwave oven to heat up the coffee.
Keep out of reach from children or from persons with mental or physical
disabilities when operating the unit.
Never leave empty carafe into the hot plate while Coffee Maker is in
operation.
Switch OFF and unplug the Coffee Maker from outlet before filling,
emptying, when not in use or before cleaning.
Allow Coffee Maker to cool down first before cleaning or replacing new
ground coffee.
To reduce the risk of electric shock, do not immerse or expose the Coffee
Maker to rain, moisture or any liquid.
Hold plug when unplugging from socket. Do not unplug by pulling the
supply cord.
This KYOWA Coffee Maker is intended for normal domestic/household use
only. This model is not suitable for commercial use.
CONGRATULATIONS
You are now a proud new owner of a KYOWA Coffee Maker model no.
KW-1211.
Before using for the first time, kindly take time to carefully read your
instruction manual. Please observe all safety precautions and follow
operating procedures. After reading, kindly store your instruction manual in
a safe place for your future reference. If you pass this Coffee Maker to a
third party, this instruction manual must also be handed over.
PARTS DESCRIPTION
1
2
