—
21
—
2. How to replace Adaptors
To remove the adaptors, pull them out. Then firmly attach the
adaptor as desired to the tip of the Earth cord.
#
DANGER
Disconnect the test leads from the instrument before replacing
the test prods of the Line probe or the adaptors of the Earth
cord in order to avoid a possible electric hazard.
10．Cleaning of the instrument
Cleaning Meter cover
When cleaning the instrument, wipe it with a silicon cloth or soft
cloth to remove dust or dirt.
When it is hard to remove the dirt, wipe it with a cloth wet with
water and dry the instrument completely after cleaning.
#
CAUTION
Never use any solvent which may transmute plastics, for
example, organic solvent such as benzene, acetone, etc.
11．Servicing
If this tester should fail to operate correctly, return it to your
nearest distributors stating the exact nature of the fault.
Before returning the instrument, make sure that:
a) Operating instructions have been followed.
b) Test Leads have been inspected.
c) Fuse has been checked.
d) Battery has been checked.
e) The unit is returned with all accessory leads.
Remember, the more information written about the fault, the
quicker it will be serviced.
Safety alligator clip
Test bar
Fig. 17
www.
GlobalTestSupply
.com
Find Quality Products Online at:
