Kyoeisha Baroness HMA1560, Service Manual

Page: 14 / 28

- - 12
A. Step
It is a simple riding unit provided at
the back of the machine.
The electric cylinder is at the right
side of the disc at the center.
The photo shows the step without the
cover.
B. Step operation switch
. Step control changeover switch
(Photo: Top)
AUTO :
The step automatically swings
according to the angle of inclination.
MANUAL :
Use the switch shown at the bottom
of the photo to swing the step.
. Step control manual switch
(Photo: Bottom)
Manual operation switch to be used
when the switch shown at the top of
the photo is set in the “MANUAL”
position.
7-5. Step
C. Horizontal sensor
(Analog sensor, Slope Eye 30)
It is at the front of the disc at the
center.
This horizontal sensor senses the
angle of inclination.
D. Horizontal controller box
It is in the lower section of the back
inside the electrical equipment box.
The signal from the horizontal sensor
is transmitted to the electric cylinder.
Refer to “5. Electrical equipment.”
E. Relay
(Two relays - front and back - at the
far left of the photo)
External relays for the horizontal
controller box
Refer to “5. Electrical equipment.”