Kyoeisha Baroness HMA1560, Service Manual

Page: 10 / 28

- - 8
A. Hydraulic tank
The tank is at the front of the center
of the machine. The oil filler port and
oil level gauge are at the left side of
the machine.
Remove the seal of the oil filler port,
and carefully supply hydraulic oil so
that dust or other impurities will not
enter.
Hydraulic oil : Shell Tellus ST46
D. Traveling motor (MAG motor)
0.35 L of gear oil is in the speed
reducer of the traveling motor.
Change oil after 50 hr of initial
operation and every 200 hr thereafter.
Gear oil : VG140
B. Hydraulic tank drain
The drain is at the bottom of the right
side of the hydraulic tank.
The drain plug itself has no sealing
function.
Be sure to apply seal tape.
C. Oil filter
It is at the left side of the back of the
machine.
Refer to “6. Hydraulic circuit and
equipment.”
7. Maintenance of each part
7-1. Hydraulic system
(Supplement) Direction of port when changing gear oil
Waste oil Oil supply