Kyocera Xi3648 Instruction Handbook Manual Download Page 18 | Manualshive

Page: 18 / 103

Kyocera Xi3648 Instruction Handbook Manual Download Page 18

System Installation

2-7

The copier cannot be controlled via the copier operation panel while resetting the
offline status. To control the copier via the operation panel, first press the on-line key
to turn the on-line indicator off.

The copier is in the on-line mode (the on-line indicator is on) after the offline status
has been reset. The copier automatically returns to the on-line mode if no copy is
made for a certain period while the copier is offline.

Check the following before starting to control the copier via Xi Repro System or the
copier operation panel.

• Controlling the copier via Xi Repro System

Check if the on-line indicator is on.
If the on-line indicator is off, turn it on by pressing the on-line key.

• Controlling the copier via the copier operation panel

Check if the on-line indicator is off.
If the on-line indicator is on, turn it off by pressing the on-line key.

«
...
16
17
18
19
20
...
»

Summary of Contents for Xi3648








































































































Reviews:

No comments