System Installation
2-4
2.2 Installing Xi Repro System
1. Start Windows NT and close any unnecessary applications.
2. Insert the supplied CD-ROM into the CD-ROM drive.
3. The
Setup
screen appears followed by the
Welcome
screen. Click on the “Next”
button.
4. The
Choose Destination Location
screen appears.
Click on the “Next” button.
5. The
Setup Type
screen appears.
Select the connected copier and click on the “Next” button.
Select “Client Software” to install Xi Repro System on a Remote Client.
6. The
Select Components
screen appears.
Select all the components under normal circumstances and click on the “Next”
button.
7. The
Select Program Folder
screen appears.
Click on the “Next” button.
The program group name can be changed to any desired name.
8. The
Start Copying Files
screen appears.
Click on the “Next” button.
9. The
Setup Complete
screen appears after installation is completed.
Remove the CD-ROM from the CD-ROM drive and click on the “Finish” button to
restart the computer automatically.
Proceed to
2.3 Setting the copier.
The installation program creates a program item in the Start menu. The program
group name is “Xi Repro System”, which contains three program items called Client,
Admin and Stamp. The plotter driver is installed in the Windows NT Printers folder at
the same time.
When uninstalling Xi Repro System, files in the C:\Program Files\Xi Repro System\
Plots directory may be deleted. Move any image files before uninstalling Xi Repro
System.
