Kyocera TASKalfa 3011i Page 112 Operation Manual Download

Page: 112 / 607

2-47

Installing and Setting up the Machine > Installing Software

Click [

Finish

] to exit the wizard.

If a system restart message appears, restart the computer by following the screen prompts.
This completes the printer driver installation procedure.

If you are installing the TWAIN driver, continue by configuring the following:

Custom Install

The following procedure is an example for installing the software in Windows 8.1 using [

Custom Install

Insert the DVD.

Display the screen.

Select [Custom Install].

NOTE

When you have selected [

Device settings

] in Windows XP, the dialog box for device setting

will appear after [

Finish

] is clicked. Configure the settings for options installed on the

machine. Device settings can be configured after the installation is completed.

Printer Driver User Guide

Setting TWAIN Driver (page 2-54)

NOTE

• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "

Welcome to the Found New Hardware Wizard

" dialog box displays, select

[

Cancel

• If the autorun screen is displayed, click [

Run setup.exe

• If the user account management window appears, click [

Yes

] ([

Allow

]).

1 Click [

View License Agreement

]

and read the License Agreement.

2 Click [

Accept

Summary of Contents for TASKalfa 3011i
































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TASKalfa 3011i

Reviews:

Related manuals for TASKalfa 3011i

Brands by name

Popular brands

Kyocera TASKalfa 3011i, Operation Manual

Search results

Summary of Contents for TASKalfa 3011i

Reviews:

Related manuals for TASKalfa 3011i

Brands by name

Popular brands